Lost Letters

*Will update. Wanted to get out during couch lands! **Any feedback would be greatly appreciated!

Lost Lands letter beads I created using the festival font. Made some amazing kandi with these for 25', and I can't wait to make more for this year. I find the best success with stringing 6/0 glass seed beads between each letter to prevent overlapping, and I would recommend using this method. The holes are sized for 1mm cloth covered elastic cord

The profile is set up to be able to simply copy and paste the letters you want onto an empty plate that is set up for 2 colors on plate 6, and single color on plate 7 (delete existing letters on these plates if unwanted). No plates are arranged for printing, recommended to place wanted letters in one of these two plates, then auto arrange. The plates are labeled, and have these 4 options (plate #):
     (1) Horizontal hole with ironing

     (2) Vertical hole with ironing

     (3) Horizontal hole no top ironing

     (4) Vertical hole no top ironing

*For Silk Filaments, the letters without top ironing should be used. Non-AMS users can change the filament swap to a pause layer, then manually swap for the same result. (will add individual profiles later)

*Using concentric top surface pattern, and arachne wall generator is recommended!

The holes are achieved with negative parts to allow for modification if needed. If you aren't using Bambustudio, I included STLs with sets of letters that have the holes already cut that you can import into other slicers

Example using 6/0 seed beads for spacing

Reach out with any questions, and happy Lost Lands!

Teaser on some upcoming beads I'll be posting soon to go with these!