Smart Sensor Swivel Mount
Print Profile(1)
Description
This mount was designed for a smart presence/motion sensor at the request of a colleague from work.
Nothing fancy — just a clean, functional holder that does the job.
The mount uses double-sided tape for installation and features a ball joint, allowing you to easily adjust the sensor angle after mounting.
Dimensions:
- Bottom base: 30 × 60 mm
- Top plate: 15 × 15 mm
- Total height: 40 mm
Printed and tested in real use.
Maybe it’ll be useful for someone else too 🙂
- Simple design
- Adjustable angle (ball joint)
- Easy mounting with double-sided tape
Boost Me (for free)
Useful? A boost is always appreciated 🙂
☕ If you like this model, you can support me here:
🛠️Before You Start Printing
Before printing, give the bed a quick clean 🧽 — good adhesion = better first layer and accurate geometry.
Use dry filament (wet filament loves to pop, string, and ruin dimensions).
When using my MakerWorld profiles, make sure the selected material matches what you’re actually printing. Different materials shrink and behave differently — the wrong profile can mean wrong dimensions.
Also, my STL files are designed and dimensioned for PLA. If you print them in PETG, you may need to slightly rescale the model to compensate for different shrinkage.
Clean bed. Dry filament. Correct material. Done 😄
Documentation (1)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)