B SPEC BUGGY CHASSIS SCX 24

CHASSIS DESIGNED TO WORK WITH SCX24 GLADIATOR OR POWER WAGON LENGTH SUSPENSION LINKS.  INCLUDES A BATTERY BOX THAT HOLDS THE STOCK SCX 24 BATTERY, SKIDPLATE/ A TRAY FOR THE RECEIVER AND THE HOOD/ROOF/TRUNK PANELS.   YOU CAN TAKE APART YOUR STOCK SCX 24 AND SWAP OVER THE MOTOR/TRANS/ELECTRONICS AND SUSPENSION PARTS AND IT WILL WORK PRETTY GOOD.  I DO RECOMEND AN APPROX 5MM HUB SPACER IF YOU USE THE STOCK WIDTH AXLES AND STOCK WHEELS.  THERE ARE FILES FOR THOSE ONLINE. FOR EVEN BETTER RESULTS ADD WIDER AXLES AND SLIGHTLY LONGER SHOCKS.   

 THE HOLES ARE SLIGHTLY UNDERSIZED IN BOTH THE CHASSIS AND HOOD/ROOF/TRUNK/TRAY SO YOU HAVE TO RUN THE APPROPRIATE SIZED DRILL THROUGH THEM.  I FEEL THAT IS A BETTER OPTION THAN ASSUMING ALL PRINTERS WILL PRINT AN ACCURATE SIZED HOLE. AFTER THAT THE M1.4 SCREWS WILL PASS THROUGH THE CHASSIS RAILS AND THREAD INTO THE OTHER PARTS.  THE UPPER LINKS WILL NEED NUTS AND BOLTS TO ATTACH INSIDE THE CHASSIS.   THE SKID IS THE FREE FILE FROM 24YEP, I DESIGNED THE CHASSIS AROUND THAT.