Compact Wall-Mounted Toothbrush+Toothpaste Holder

Wall-Mounted Toothbrush + Toothpaste Holder (All-in-One Bathroom Organizer)

Upgrade your bathroom with this compact, wall-mounted toothbrush & toothpaste holder.
Designed to keep your sink area clean and organized while saving space.

✔️ Holds up to 3 toothbrushes + 1 toothpaste tube
✔️ Perfect for families, couples, and shared bathrooms
✔️ Keeps brushes off countertops for better hygiene
✔️ Minimalist design – fits any bathroom style
✔️ Easy to 3D print, no supports required

A simple, practical bathroom upgrade you’ll use every day.

Mounting Options

• Double-sided tape (Command strips)
• Adhesive mounting (user preference)

Adhesive Mount – Clean, drill-free installation (use strong double-sided tape or adhesive pads)

Important: Clean Before Mounting

For the adhesive or double-sided tape to stick properly, surfaces must be clean and oil-free.

Step 1 — Clean the Printed Part

After printing, wash the Toothbrush + Toothpaste Holder with warm water and dish soap to remove any oils, residue, or fingerprints left during printing and handling. Dry completely before applying adhesive.

Step 2 — Clean the Wall Surface

Wipe the surface where you plan to mount the holder using alcohol or household cleaner to remove dust, moisture, or grease. Let the surface dry fully.

⚠️ Adhesive will not bond well to dirty, dusty, or wet surfaces. Proper cleaning ensures a strong, long-lasting hold.

Printing Recommendations

• Material: PLA, PETG (PETG recommended for moisture resistance)
• Layer Height: 0.12 mm
• Infill: 15–30%
• Walls: 3–4 perimeters for strength
• Supports: Not required
• Seam position: Back

Check out my Adhesive Wall-Mounted Soap Dish:

https://makerworld.com/en/models/2307783-adhesive-wall-mounted-soap-dish-with-drain-slot#profileId-2519273