Wall art palm beach

The geometric figures (wall art) continue, beautiful in my opinion (check my profile for other models). When hung, they appear to float, creating a 3D effect on a white or light background

This object features the silhouette of a palm tree on a tropical beach at sunset with 2 birds in flight, all enclosed within a stylized circular shape

Ideal for hanging on walls to add an artistic and modern touch to interior decor, such as living rooms, bedrooms, or offices. It can also be used outdoors; in this case, use a more resistant material like PETG

Printed in Bambu Lab PLA in black, white, and silver. Printing is very easy

Colors can be changed from the slicer at the time of printing; the model can be enlarged or reduced as desired. Usually, 3 mm thickness is more than sufficient. So if you enlarge it on the x and y axes, keep the “Uniform Scale” function active, then to reduce the thickness, uncheck “Uniform Scale” and only adjust the z-axis value, which you will set to 3 mm

It does not require an additional assembly process and can be hung with a single nail or double-sided tape

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then dry it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small precautions, along with many others, determine the success of a good print

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; we will look for solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, humid or poor quality filaments, do not blame me

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• Infill 15%

• Grid pattern

• No supports

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration speed 10000 mm/s

• Outer wall acceleration speed 10000 mm/s