Rangiku Matsumoto - Bleach - ChromaLink
Print Profile(2)
Description
ChromaLink Hex Wallart for Bleach Anime/Manga Character "Rangiku Matsumoto".
Based on the ChromaLink Base System from the Creator “Superseaslug”
Below are the default Hueforge instructions, add 18 layers to the swap instruction as the ChromaLink base is 18 layers high.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 216.22x250mm in size
You may print at higher layer heights below the Base Thickness of 0.16mm
The Max allowed Thickness is 1.92mm and the Actual Thickness is 1.92mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#950051 PLA BambuLab Matte Plum Transmission Distance: 1.6
#f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Plum
At layer #11 (0.96mm) swap to Mandarin Orange
At layer #17 (1.44mm) swap to White for the rest.
This remix is based on
License
Comment & Rating (0)