Apex Legends Bloodhound Ravens Bite Axe Heirloom

Thanks for viewing my model!

The print plates in the .3mf file contain all parts needed and can be printed with any filament color, but black is recommened. 

This model should be assembled with super glue gel along with internal ¼" threaded steel rods. The steel rods can be found in the hardware aisle of Home Depot Canada and USA for about $6 for a 72" rod that you will cut into the following 3 lengths:

• 165mm rod that connects the axe head to middle handle
• 130mm that connects the middle handle to lower handle
• 130mm that goes inside the axe head for weight

I suggest that you generously apply super glue so that it oozes out when you attach the pieces together and then wipe away the excess and then let dry. Use sandpaper to smooth out the connections and then once it's assembled, spray with 1 or 2 coats of filler primer and then black paint for the body of the axe and then red paint for the red accent on the blade of the axe. If you really want to go crazy you can even hit it with some clear gloss after.

I went with a criss-cross pattern for the paracord handle but you can simply use a spiral pattern if you like.

For the charms and their various colors, I suggest going to the dollar store and getting a childrens painting kit that has all colors of the rainbow to keep things cheap. I have included a picture of the charms and the colors they should be.

I have included 3 different variations of the words on the desk stand, included are Bloodhundur, Bloodhound, and Ravens Bite. Apply superglue to attach to the desk stand.

Please contact me through MakerWorld regarding licensing if you are planning on selling these, if you do not plan on selling them, then go right ahead and make your room a little cooler :)

Cheers!

HD