LumaWeave - LED Lamp
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
If you like my projects, I would greatly appreciate a boost.
Thank you very much.
LumaWeave is a simple, modern table lamp with soft, even light. The finely structured, white lampshade provides pleasant light diffusion, making the lamp ideal for living rooms, bedrooms, or as subtle ambient lighting.
The lamp can be completely printed on the Bambu Lab A1 mini and uses a total of about 80 g of filament.
Print details:
- Bottom Base: 3 walls, 15% Gyroid infill
- White Lampshade: Solid infill, as it is only 2 walls thick
- No support needed
Required hardware:
- LED Lamp Kit (1 pcs) – MH001 from Bambu Lab
Assembly instructions:
- First, unscrew the upper ring of the LED lamp.
- Guide the LED cable through the opening of the bottom base.
- Position the LED. Ensure that the holes in the LED housing are flush with the two screw holes of the base.
- Secure the LED with the supplied screws.
- Then, screw the upper ring of the LED back on.
→ This can be a bit fiddly, as the LED will then sit flush with the surface of the base, but it looks much better. - Insert the white lampshade into the uniform slot of the base.
- Secure with a few small drops of glue.
Important note:
It is recommended to test the lampshade without glue beforehand to ensure everything fits. For me, it fit perfectly right away. If not, minor adjustments can be made.
Please note: If the shade is firmly glued, the LED cannot be easily replaced in an emergency.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)