Portable Rolling Stand / Paper Holder

This minimalist rolling stand is a practical building aid for use at home or on the go. When assembled, the two parts form a stable V-shape that securely holds long papers and other rolling papers while you work.

The model uses a compact plug-in system made from two matching parts that can be transported flat and assembled in seconds. The large version measures 150 x 54 mm, while the small version measures 120 x 54 mm.

For added convenience, one side includes four tip holder holes in different sizes, making it easy to keep filter tips organized during use. The hole diameters are 5.3 mm, 6.3 mm, 7.3 mm, and 8.3 mm, and each hole has a 0.5 mm chamfer on both sides for easier insertion.

Both parts also feature finger recesses, which make it easier to remove the paper after rolling. A 1 mm outer chamfer has been added around the edges to reduce sharp corners and improve how the stand sits on the table.

The model is provided in four build plate variants, so you can choose the size and layout that fits your needs best. The large version with tip holder uses about 44 g of filament and takes around 1 h 31 min, the large version without holes uses about 44 g and takes around 1 h 28 min, the small version with tip holder uses about 35 g and takes around 1 h 14 min, and the small version without holes uses about 35 g and takes around 1 h 11 min.

Key Features

• Flat-pack plug-in design for easy transport and storage.
• Large and small size options.
• Optional tip holder with four different hole sizes.
• Finger recesses for easier paper removal.
• Outer chamfered edges for a smoother feel and cleaner look.
• No support required.

Print Settings

• Material: PLA, PETG, or similar.
• Wall loops: 3.
• Infill: 15% Gyroid.
• Layer height: 0.16 mm.
• Print order: Print by Object recommended.