H2S H2D H2C Riser 40mm
Print Profile(1)
Description
H2S H2D H2C Riser 40mm
Simple and plain glass riser
This riser provides enough upward space for the cutting module and laser without removing the glass lid
Print in PETG at minimum
(PETG shrinkage should be 99.6%; please apply this in the filament settings or determine it yourself)
A 6x2 magnet (or 14x4x1.5) is needed, which is pressed into the foam rubber sealing tape on the printer where the glass lid sensor is
Foam rubber sealing tape 40x1mm for the sides (or 2x20mm glue next to each other)
Foam rubber sealing tape 25x1mm for the back (or 1x10mm + 1x15mm glue next to each other)
Foam rubber sealing tape 15x1mm for the front
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)