Baby Shower Cake Toppers – Mixed Pack

This is a small collection of baby shower cake toppers I made while organizing a baby shower for a friend.
Since they were already designed and printed, I figured I’d share them here as well – maybe they’ll be useful for someone else too 🙂

The pack includes multiple topper designs such as baby feet, teddy bears, “Oh Baby”, and others :) 

•  Simple, clean designs
• Easy to print
• Perfect for baby showers, gender reveal parties, or newborn celebrations
• Fully scalable — recommended minimum thickness: 2.5 mm for best strength and print quality

Nothing fancy – just practical, tested party decor made for a real event.

Enjoy and happy printing!

☕ If you like this model, you can support me here:

🛠️Before You Start Printing

Before printing, give the bed a quick clean 🧽 — good adhesion = better first layer and accurate geometry.

Use dry filament (wet filament loves to pop, string, and ruin dimensions).

When using my MakerWorld profiles, make sure the selected material matches what you’re actually printing. Different materials shrink and behave differently — the wrong profile can mean wrong dimensions.

Also, my STL files are designed and dimensioned for PLA. If you print them in PETG, you may need to slightly rescale the model to compensate for different shrinkage.

Clean bed. Dry filament. Correct material. Done 😄