Wool and Yarn Knitting Spool
Print Profile(3)
Description
The model is a bobbin for knitting wool. It consists of the bobbin base and the bobbin itself. The bobbin base is designed so that a cavity of approx 5x5 cm is left in the lower part. During printing, the printer can be stopped there and weight can be added to make the base heavier (I use 2 small tiles), then printing is resumed. Attention: For this, insert a pause at the appropriate layer (approx 60) after slicing! If that is too complicated, I recommend an infill of 50% to increase the weight. The sleeve has enough play so that the wool rotates easily on the stand. I print with PLA, PETG also works, of course. 3 walls are recommended. Infill of 15% is sufficient
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)