Mid-Century Modern Nightstand

This is the first project I'm officially releasing to the community. I wanted to recreate the classic Mid-Century Modern look in a full-scale piece of furniture that stands 550mm tall while remaining printable on a standard desktop machine.

The Design

The nightstand features the iconic flared legs typical of MCM design, which are always lovely to look at and give the piece its characteristic silhouette. On the top surface, I’ve incorporated a "Sunrise" pattern that aesthetically blends the top surface seam lines into the design, making the assembly look like a deliberate geometric inlay.

The Build (16 Pieces)

To make a piece of this scale possible, the model is broken down into 16 parts:

• 8 Body Pieces: These form the main cabinet and storage area.
• 8 Leg Pieces: Each of the 4 flared legs is a 2-piece assembly for easier printing and structural strength.
• Total Dimensions: 330mm (L) x 380mm (W) x 550mm (H).

Assembly & Fitment

The entire project is designed to be superglued into place. During assembly, you will find that some connections are a snug friction-fit, while others are notched into place without a noticeable "snugness." This is normal and intentional. The variation is incorporated into the design to help with alignment as you join the pieces.

Filament & Print Settings

Just a heads-up: this is a filament-expensive print. Because it is a functional piece of furniture, it requires a significant amount of material.

• Pro-Tip: To save on filament and time, you can lower your infill to 8-10% (Lightning infill is a good option) and use a higher wall count to keep the exterior strong and looking clean.

Important Notes

• Compatibility: Designed for standard 256x256mm beds or larger.
• A1 Mini: These parts are too large for the A1 Mini bed.