Search models, users, collections, and posts
Low Profile Stand for Blue Snowball
Print Profile(1)
0.24mm layer, 2 walls, 15% infill
22 min
1 plate
Open in Bambu Studio
Boost
11
25
9
1
158
122
Released
Description
- An ultra low profile stand for the Blue Snowball stand.
- 5/8"-27 mount for the mic.
- Just enough clearance to fully tilt the microphone on the screw.
- 70mm diameter base ensures the microphone won't tip or roll while still being a small footprint and low profile on your desk. Like a sturdy shadow.
Print Settings
Rafts:
No
Supports:
No
Resolution:
Recommend you use as fine a resolution as you can to maximize thread accuracy, as the screw is 5/8"-27.
Infill:
10% infill is fine. 20% will make it slightly stronger if you want.
Filament: PLA Blue pictured, recommended you print in a colour that matches your microphone.
Printed at my local library so filament brand is unknown, but any PLA should be fine.
Overall print weight should be ~8g.
Post-Printing
Paint
Taped off the screw and painted the base black to match the microphone.
To ensure the threads fit your microphone well it is essential you tape it off if you are painting the base.
2 coats of acrylic matte black.
Tags: Audio, Gadgets, Microphones, etc.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (9)