BBS LM 3pc wheel Replica Headphone holder

I have designed a few models for either display of your favorite wheels or for a functional holder for your headphones. This hold my Air pod pro max, and my ps5 headsets perfectly. This design is based off the BBS LM multipiece wheel. I set this up on 4 different plates, to give you options of single color printing, and also to customize however you would like. The fun part is you get to build the wheel like a real 3pc wheel, with the barrel, the face and the lip. The LM I designed can be a sandwiched style build (face between barrel and outer lip) or for less lip you may install the lip on the barrel and then insert the face on top of the lip. I hope you enjoy these! I may Release more of my products, with the other designs, on demand. 

I used real m4x20 bolts with m4 nuts on my wheels. (As seen on my BBS RS) you can print these if you'd like. or fill the holes in and just simply glue them together. i would print 4-5 4mm rods to align everything when glueing.

You can use M3x20 bolts/nuts as well, as some printer's tolerances may be different causing some bolts to be tight going. hole diameter is set to 4.5mm there should be adequate room! 

Check out the RS design here: BBS RS Headphone Stand/Holder - Free 3D Print Model - MakerWorld

 I currently sell this as headphone/controller holders, but this is my free version without the controller holders. ( i have BBS RS, Volk Te37, Desmond Regamaster, and the Enkie Rpf1 files already completed! Comment with your favorite wheel and maybe I will choose it for my next design. (te37 and single piece normal wheels are one piece prints.)