Print Profile(5)
Bill of Materials
Description
Compact Harmless Electric Shocker
This ''electric shocker'' is a harmless small device that can deliver electric shocks.
For this, I disassembled the flint from a piezo lighter / electric lighter (a lighter with a button, not a wheel) and designed a suitable ''housing'' for it.
With it, you can generate slight electric shocks - similar to small electric shocks one regularly gets in summer - but with which no one can be injured. This is therefore just a harmless toy and cannot cause any harm.
 | First, I recommend prying off the cap with a sharp object. In this case, I used a spatula. |
 | After that, you can easily remove the flint / piezo igniter together with the cap. |
 | Then simply pull the cap off the flint / piezo igniter. |
 | Now insert the flint / piezo igniter into the hole. |
 | Then place the ''lever'' diagonally (as shown in the picture). |
| Then fold down the lever and it's ready. |
I have uploaded several versions where only the diameter of the hole differs.
From 5.2 mm diameter to 6.0 mm diameter in 0.2 mm increments. I hope there is a suitable one for everyone. If not, I have also uploaded the STEP file, which you can then adjust as you wish.
It is best to measure the cylinder (silver in the picture) once and then select the appropriate print file for you.
I wish you a lot of fun with it :-)
Boost Me (for free)
If you like it, feel free to support me with a free Boost. It motivates me to design and upload more models.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)