Dr. Light's Puck Capsule Lamp (Megaman X) - No AMS
Print Profile(1)
Bill of Materials
- Acrylic Tube, 80 mm diameter (74 mm inner), 13 cm length x 1:
- Superglue x 1:
Description
Back to the 90s with Dr. Light's Puck Capsule from Megaman X!
Based on the 8-Bit Image from the original video game I reimagined Dr. Light's Capsule. I designed it so it could fit one of the Bambu Puck Lights (sure that other ones fit too, but have not tested it).
I bought a satin finish acryl tube with 80 mm outer diameter and 13 cm length for it. I also included a plate with a thin tube for printing but it works not as good for light transfer. To get the best surfaces and keep it non-AMS 3 parts need to be glued together: The upper braces and the upper metal receiver need to be glued to the top part.
I printed it with quite low tolerances since it always felt too wobbly otherwise, so some elbow grease might be needed to put the parts together.
Have fun printing.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)