Turtleyawesome

cover

plate_1.png

No AMS (Layer Pause)

plate_2.png

20241008_225443.jpg

Two separate plates depending on whether you need the AMS or a manual filament change. Enjoy!

Both AMS and Non-AMS Versions 

50% scale

40% scale

37% scale

plate_3.png

25% scale

plate_4.png

Odyz

IMG_8917.jpg

IMG_8915.jpg

IMG_8916.jpg

Scsadadadareenshot_1.png

<ul><li>2 Color no AMS</li><li>add a pause so you don't have to</li><li>0.08mm Extra Fine profile, 15% infill, 2 walls</li><li>Iron All top surface (except the 25% scale)</li><li>Lowered the thickness to 2.5mm.</li></ul>I did scale it down to 4 versions and tested them with a 0.4mm nozzle when it comes to scaling lower than 40% you start losing text. So if you want the best stick to 40% and higher. but I did like the lower version more since I can put it on my keys and won't bother me. If I get 0.2mm &nbsp;I will test it again.&nbsp;Holes are negative parts, you can modify them to your needs, all 4 versions have the same thickness so you can print them all together on the same plate

Keychain [Scaled down (50-25)%], 2 color no AMS

Initial D Fujikara wall sign

After seeing the great upload from <a href="https://www.printables.com/@MichaelW_523095" rel="nofollow">This Noise</a> I remixed this into one piece and made it a bit thicker. A simple colour swap is all that is needed. No special printing parameters but I did turn ironing on.

Initial D Fujiwara Tofu Store Plaque

ASIA

Print Profile(2)

Description

Comment & Rating (6)

This remix is based on

License

Related Models