Flip 7 Box with Hit/Stay Tokens

My family plays this game ALOT and we play with lots of people. 

1. Problem one - The game is well traveled and the original cardboard box is TOAST
2. Problem two - we play sometimes with 10 or more people.  “Have you passed yet?  You want a hit?”

Solution:  The box to hold the cards and a compartment for 2 sided Hit/Stay tokens!!

My first model I am posting here.  Some things to consider:

• I used color by layer height on the tokens to make the 2 sided, but also, the “7” is of course inverse on one side which you could easily use as Hit or Stay
• The instructions do “fit”, but I am considering a remix in which I create a cut-out for those over the cards
• There is a small cut running through where the cards and this is by design to make picking up the bottom card easier
• There is not an .STL for the lid…..because I wanted to print the logo flush and the only way I could figure this out was modeling the letters, both inner and outer as separate bodies, so I could paint by face.  I am sure there are better ways to do this when printing a first layer face down with multiple colors, but I tired of exploring them.  I am open to an education on this