SpinDot – Dual Spin

New arrivals: 

🌀 SpinDot – Dual Spin

45min print. Zero fuss. Maximum fun.

SpinDot is a **compact dual-spin fidget: The inner ball sits freely in the cage** and can be spun independently of the frame. The open side surfaces allow you to clearly see the movement – and feel it instantly.

Both axes run buttery smooth – whether you spin the ball or the cage.

**Printed in just 45 minutes, with no supports, no post-processing.** Perfect as a desk toy, gift, stress reliever, or simply as a hypnotic technical object.

• **no supports**
• no post-processing
• **45 minutes print time**
• works with any filament
• especially beautiful with Rainbow or Gradient
• **Optional with keyring – for on the go**

SpinDot is a small, precise piece of motion – ideal for your desk, bag, or as a small gift.

One of the Makers also invented a use case that I had completely missed (thank you very much for the great idea!):

“Hi, I printed your SpinDot model and it works great. I had a lot of fun holding the cage and blowing on the ball to spin it up, then setting it down and it turns into a spinning top. I was surprised you didn't mention it in the model description, so I wanted to share this fun experience with you :)”

Update 01/25/2026: For cases where the printer simply doesn't do what you want. Despite over 1000 successful prints, some users still have adhesion problems - for this, I have now generated a “Super Safe Mode” variant. In this, the design of the SpinDot is slightly altered, thus increasing the contact surface - slightly different design, same function, even better adhesion…. See image in print model for details…

Update 01/19/2026: I have just made a “Safe Mode” model available with extra slow structures (inside and out) and a brim on the outside of the cage.

Update 01/17/2026: In the original files, I defined the ball and the cage as one object - so that multiple objects can be printed without separating the ball and the cage. Many thanks for the feedback!

Technical Specifications

• **Size: 3 cm**
• Print time: approx. 45 min
• Material: PLA
• Supports: none
• Infill: 15–20 %
• Layer height: 0.2 mm
• Tolerances: standard 0.2 mm work perfectly
• Optional with keyring

For all Pro-Makers looking for the especially **smooth** spin - and have **very well calibrated printer** setups - the **SpinDot PRIME**:

My friend Maker @Nocho has designed a nice **holder for the SpinDots** - check it out!

That the **Spindot can also be used as a D6-Dice** was the **BRILLIANT idea from** @bsfoster0 (1000 thanks!!!)

You can find my **other fidgets** (including the **ArcSpin**) in this collection:

_____________________________________________

SUPPORT THIS MODEL If you like this model — a boost keeps the FloW! Universe growing. More fidgets are coming. Your support makes it happen. Thank you! 🖤🤍

LICENSE 🔒 Commercial license coming soon. Want to sell prints of this model? Stay tuned — a commercial license will be available shortly. Follow me to get notified.