SwitchBot K10 K11 – Diverting exhaust air upwards

The SwitchBot K11 robot vacuum expels its exhaust air sideways. This can cause dust bunnies and light debris to be swirled back onto already cleaned surfaces.

This 3D-printed baffle specifically redirects the exhaust air upwards, preventing dirt from being redistributed.
The baffle is precisely designed and can be easily attached with double-sided tape or thin mounting tape – without any screws or permanent modifications to the robot.

Mounting Tip – Supplement
For a 100% precise fit, the printed baffle (PLA / PLA+) can be gently heated with a hairdryer during attachment. This makes the material minimally flexible, allowing it to be precisely pressed against the robot's contour.
Then let it cool down briefly – the shape will be retained.

Note:
Do not overheat and maintain sufficient distance to prevent the material from deforming or being damaged.

Advantages:

• Prevents dust and lint from being stirred up
• Cleaner cleaning result
• Quick assembly with tape
• No modification to the robot required
• Compact and quick to print

Installation:

1. Clean the surface on the robot (dust-free and grease-free).
2. Apply double-sided tape to the back of the baffle.
3. Attach the baffle precisely to the side exhaust opening.
4. Done – the airflow is redirected upwards.

Note:
Please ensure that the exhaust air is not blocked and that sufficient air can escape. Use at your own risk.