Everdell Silverfrost Insert - Free 3D Print Model

Search models, users, collections, and posts

Lukas

Toys & Games>Board Games

IP Report

Print Profile(1)

All

P2S

H2S

H2D Pro

P1P

X1 Carbon

H2D

X1E

H2C

P1S

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

18.3 h

5 plates

5.0(2)

Open in Bambu Studio

Boost

Released

Description

Features:

Designed specifically for Everdell: Silverfrost
Organized storage for all cards, tokens, and game components
Fits premium sleeved cards
Significantly reduces setup and teardown time
Optimized to fit inside the original game box

Token Upgrade:

Original cardboard tokens are replaced with 3D-printed tokens
Improved durability and table presence

Crystals

Print the Quartz print profile 25 times at 66% scale.
Profile: https://makerworld.com/de/models/1984747-crystal-display-pack?from=search#profileId-2135417

Acorn

Print the model on the first print plate 25 times at 85% scale:
https://makerworld.com/de/models/1867968-acorn#profileId-1998959

Wood

https://makerworld.com/de/models/2335684-everdell-silverfrost-wood-token#profileId-2552823

Chimney

https://makerworld.com/de/models/2335979-everdell-silverfrost-chimney#profileId-2555223

Moss

https://makerworld.com/de/models/2447471-everdell-silverfrost-mosstoken#profileId-2686565

Snow

https://makerworld.com/de/models/2447422-everdell-silverfrost-snow-token#profileId-2686503

Fire

Print 36 times at 60% scale.

https://makerworld.com/de/models/878836-campfire-small-wood#profileId-832467

A practical and clean storage upgrade for Everdell fans who value organization and ease of play.

boardgame storage solution

Comment & Rating (25)

@3djuju

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Since I got this great game, I've been looking for a better insert as the one that comes with the game is pretty bad and is adds a long time to setup the game. This solution really cuts down on the setup time and fits perfectly! Thanks for sharing!

@Tramba

Looks good :-) What size did you print the acorns in

Show original

@3djuju

Boosted

Replying to @Tramba :

They are from the collector's edition, I did not print them

@PriusGuy2019

Excellent insert! I have "Everdell Silverfrost" (Essentials Edition), and everything fits perfectly! I used Dragon Shield clear matte sleeves for the large cards, and they all fit. No lid lift at all. The mountain boards and game board are all at the bottom of the box under the containers. I would say the only suggestion I have is to make the two-chambered box (for the point tokens) on Plate 1 have a bit thicker bottom to it, as it only printed two layers, and it's pretty paper-thin. Other than that, fantastic organizer! Printer: Bambu A1 w/ AMS Lite Diameter: 0.4 nozzle Layer height: 0.2 mm Infill: 15% Filament brand: Hobby Lobby Filament type: PLA Color: White Supports / Rafts: No / No

(Edited)

@PriusGuy2019

good morning. I was beginning to print out plate 2, and I had separated out the boxes a bit. when it finished the first layer of the long middle box on the left, it stopped for a minute or two at the corner. then, it started working on the top smaller box, but then it stopped for several minutes without starting again, so I stopped the print. is there something in your file that is causing the printing to pause unnecessarily? I have an A1 with AMS lite.

The designer has replied

@Reqqz

No, that seems to be a problem on your side.

@rcompton78

Looks great. Just about to start the print of the insert and the bits. I have seen a few comments on the snow and the moss. Are those still coming? They look greate

The designer has replied

@Reqqz

They are added now.😀

@rcompton78

Replying to @Reqqz :

thank you so much

@user_3075115009

Could you also share the files of snow blocks and moss? Thank you very much.

The designer has replied

@Reqqz

I added them now.😀

@Scrat_NL

when you upload the other tokens? Thx

@d.mueller0204

Boosted

Greetings, Finally a nice insert :-) Can you add a picture of how the other materials (fire, moss etc.) are arranged? Thank you and we are looking forward to the tokens :-))

The designer has replied

Show original

@Reqqz

I had forgotten to upload a picture of the second layer. I have now done that. I should be able to upload the resources this weekend. Have fun playing!😄

Show original

@d.mueller0204

Boosted

Replying to @Reqqz :

Thank you :-) regarding the nuts, is 85% really correct? they seem very large to me, not rather 58%? and will the rest also be uploaded (fire, moss, snow, wood)?

Show original

@Stickleg_o

Boosted

This is great! Looking forward to your release of the 3d printed tokens.

The designer has replied

@Reqqz

Thank you. I will upload the resources this weekend.😄

@Scrat_NL

Replying to @Reqqz :

🤩🙏🏻

@user_1199958480

Boosted

Very nice insert and cool tokens! Is the box also good to store vertically

The designer has replied

Show original

@Reqqz

Yes, the insert is designed for vertical storage :)

Show original

@d.mueller0204

Boosted

Will the moss and snow or ice come yet

The designer has replied

Show original

@Reqqz

They are in now.😀

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Altoids Tin Inserts

mirabatek

3.7 k

1.4 k

HSW inserts component

ondras76

5.9 k

1.4 k

Magnet insertion Fast-Tool

Jorge Rui

4.6 k

2.9 k

Packout Deep Bin Stacking Inserts

CK Designs

3.6 k

1.1 k