1/64 Miniature Scene: Building Back Entrance

(This model is exclusive to MakerWorld,All rights reserved© The finished product may not be used for commercial purposes without authorization. For licensing, please send a private message to inquire)

This model depicts a scene of a building's back door, it can accommodate 1/64 car models and figures, suitable for small-scale car model enthusiasts, giving your beloved miniature cars a home~

This set of models has been entirely printed with a 0.2mm nozzle since testing, and it is highly recommended to use a 0.2mm nozzle!

0.4mm or larger may cause details such as bricks, electrical boxes, and fences to disappear

After assembly and painting, I tried to optimize it by adding ironing to the top surfaces of the parts, which was excellent; the top layer print lines almost disappeared, compare the effect in p3, the print files are the optimized version with ironing added; (PS. The manhole cover does not need to be ironed; the top texture can be considered a metallic texture, increasing detail richness, see p6 for effect)

• Separate parts: ground, wall, door, fence, electrical box (with pipes), manhole cover
• Finished dimensions: L7.02xW8.3xH5.36 (mm)
• Requires self-assembly and painting, recommended for experienced users to print

The model is only a gray scale model, no AMS needed, each component can also use different colored filament, for example, use brick red directly for walls and silk gray for fences to show a metallic feel, saving the painting step

Painting tip: I colored with model marker pens, used cotton pads dipped in black to distress the walls and ground, the black and yellow alternating color effect on the wall was achieved by taping and painting in sections, the single yellow line on the ground was created by taping and painting the empty space

Placing small cars or hatchbacks gives a better sense of space (as in p8)