Low Profile AudioEngine 2+ BT Wall Mount

Low-Profile Wall Mount – Audioengine A2+ (Bluetooth)

This is a low-profile wall mount designed specifically for Audioengine A2+ Bluetooth dual speakers, keeping them close to the wall while remaining secure and discreet.

The mount attaches using the six existing case screws on the rear of each speaker, ensuring a solid mechanical connection without modifying the speaker itself. The bracket is then fixed to the wall using three M3 wood screws.

Printing & Strength

• Designed to be printed in PETG for improved strength
• PLA is also sufficient for typical indoor use
• Recommended infill:
  • Gyroid infill
  • ~70% infill around mounting points and structural sections for rigidity

Installation Notes

• Due to the low-profile design, installation is slightly more involved than a standard stand-off mount
• Recommended process:
  1. Measure and mark speaker position on the wall
  2. Mount the bracket first
  3. Attach the speaker to the mounted bracket
• A long drill bit is required to access the wall screws once the bracket is in place

Additional Notes

• Designed for clean aesthetics with minimal wall clearance
• No visible hardware once installed
• Happy to make adjustments or variants if specific modifications are required

If you have suggestions or need changes for a different mounting scenario, feel free to reach out.