HeroMe

cover

photo_2026-01-15_00-14-39.jpg

photo_2026-01-15_00-14-40 (2).jpg

88e6600b-4570-4d3e-959c-a86c666bca8a.png

plate_1.png

2026-01-15_e3668d5c444358.png

altezza layer 0.08 extra fine  stampa con supportiams non necessarioalbero ibridi  solo brim esterno di 10mm spazio oggetto 0mm

layer height 0.08 extra fine print with supportsAMS not necessaryhybrid tree 10mm outer brim only object spacing 0mm

0.08mm layer, 2 walls, 15% infill

takiwa

20260402_090710.jpg

20260402_090642.jpg

20260402_090650.jpg

20260402_090702.jpg

leia1.png

Start by loading Black, Maroon, Gold, and Cream into the AMS.At layer 90, change the Black to Brown.At layer 785, change the Maroon to Red.At layer 860, change the Gold to White, and the Red to Blue.&nbsp;As an option for 9 colors...you could start with a color different from Brown for the pedestal (such as Marble, for example), then change it with Brown at layer 520, so that the pedestal would be a different color from the hair. I chose to make both brown.

0.2mm layer, 2 walls, 5% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>Descrizione io per prova l&#39;ho stampata 8 cm i supporti sono delicatissimi ma se con estrema cura e pinzette si tolgono senza lasciare danni ma vanni rimossi uno per uno lentamente. pla basic bianco 0.08 extra fine  albero ibridi  solo brim esterno di 10mm spazio oggetto 0mm</h3><h2>Se li vuoi collezionare tutti… vieni qua (la trappola è già pronta)</h2><a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/it/@Gara/upload">https://makerworld.com/it/@Gara/upload</a><h2>Note tecniche (la verità, non la poesia)</h2>Preferisco stamparle monocolore e pitturarle dopo primer, usando pennarelli acrilici. Le immagini colorate servono come esempio di colorazione, poi però si va molto a gusto personale. Questo design nasce da una generazione AI (Tripo) che ho rifinito manualmente e testato su stampe FDM per garantirne stampabilità e qualità. Le foto “reali” sono quelle monocolore (bianche). Quando staccate i supporti: pinzette, calma, delicatezza (non serve fare Rambo sul supporto, che poi piangi).<h2>Come sempre (la parte che decide se stampi o bestemmi)</h2>La chiave è una sola: adesione al piatto. Io uso CryoGrip Pro Frostbite e l’aderenza è talmente buona che le stampe sembrano avere un mutuo sul piatto: non mollano mai. Uso principalmente filamenti Bambu e non ho problemi. Se hai un setup diverso:concentrati sull’adesione (prima di tutto)usa filamento secco e di qualitàfai le cose pulite e vedrai che “misteriosamente” funziona tutto molto meglio

<h3>Description For testing, I printed it at 8 cm. The supports are very delicate, but if removed with extreme care and tweezers, they come off without leaving damage, but they need to be removed one by one slowly. PLA Basic white 0.08 extra fine hybrid tree supports only 10mm outer brim object spacing 0mm</h3><h2>If you want to collect them all… come here (the trap is already set)</h2><a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/it/@Gara/upload">https://makerworld.com/it/@Gara/upload</a><h2>Technical notes (the truth, not poetry)</h2>I prefer to print them in a single color and paint them after primer, using acrylic markers. The colored images serve as coloring examples, but then it's very much a matter of personal taste. This design comes from an AI generation (Tripo) that I manually refined and tested on FDM prints to ensure printability and quality. The "real" photos are the single-color ones (white). When detaching the supports: tweezers, calm, delicacy (no need to go Rambo on the support, or you'll cry).<h2>As always (the part that decides whether you print or curse)</h2>There's only one key: bed adhesion. I use CryoGrip Pro Frostbite and the adhesion is so good that the prints seem to have a mortgage on the bed: they never let go. I mainly use Bambu filaments and have no problems. If you have a different setup:focus on adhesion (first of all)use dry, quality filamentdo things cleanly and you'll see that "mysteriously" everything works much better

Print Profile(2)

Description

If you want to collect them all… come here (the trap is already set)

Technical notes (the truth, not poetry)

As always (the part that decides whether you print or curse)

Comment & Rating (17)

License

Related Models

LEILA STAR WARS