Nautilus Spiral Vase Lampshade (29.3/42mm)

Original design — printed and tested before release

Nautilus Spiral Vase Lampshade (29.3/42mm)

Description

Original design — printed and tested before release

A modern nautilus-inspired spiral lampshade designed for a clean, premium look with beautiful light diffusion. This model is set up to print in Smooth Spiral Vase mode (vase mode), giving a continuous finish with no visible seam and a lightweight final shade.

Printed here in SUNLU Matte White PETG, it gives a soft, classy glow and a crisp spiral texture that looks great both on and off.

This listing includes two versions (two plates):

• Plate 1: 29.3mm orifice (fits 29.3mm pendant + 29.3mm UK straight batten)
• Plate 2: 42mm orifice (fits larger 42mm pendant)

💡 Key Features

• Smooth Spiral Vase finish (vase mode)
• Nautilus-style spiral texture for a modern look
• Excellent light diffusion
• No supports required
• Lightweight and quick to print
• Two fit options included: 29.3mm + 42mm

📏 Size (as modelled)

From Bambu Studio model dimensions:

• 184 × 181 × 155 mm (X × Y × Z)

✅ Fit & Versions Included

29.3mm Version (Plate 1)

• Fits 29.3mm hanging pendant
• Fits 29.3mm UK straight batten holder (same size)

42mm Version (Plate 2)

• Fits larger 42mm hanging pendant

⚠️ Scaling note: Scaling the model will also scale the hole size. If you resize the shade, you may need to re-adjust the orifice to keep the correct fit.

🖨️ Print Details (Tested)

(Using MakerWorld/Bambu settings with Smooth Spiral Vase mode enabled)

• Nozzle: 0.4 mm
• Layer height: 0.20 mm
• Mode: Smooth Spiral Vase
• Print time (model): ~2h 55m
• Total time: ~3h 02m
• Filament used: ~34.24 g
• Material shown: SUNLU Matte White PETG

🧩 Custom Sizes Available

Want a specific diameter / height / fit (or a different hole size)?
Leave a comment with the dimensions you need, and I can adjust the model files to suit.

🔥 Safety Note (Bulbs)

Use LED bulbs only (recommended for both PETG and PLA). Avoid incandescent/halogen bulbs due to heat.

PLA vs PETG (Quick Note)

• PLA: Easiest to print, crisp detail, great for cool-running LED setups. Lower heat resistance—stick to LED only.
• PETG: Tougher and more heat-tolerant than PLA, slightly more flexible, and a great choice for everyday use—still best with LED bulbs for safety and longevity.