Tip-Up Depth Set - Free 3D Print Model

Search models, users, collections, and posts

Cereal Killer

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(3)

All

X1E

P2S

H2C

A1 mini

P1P

P1S

H2S

H2D Pro

X1 Carbon

H2D

X2D

A2L

0.2mm layer, 2 walls, 40% infill

Designer

34 min

1 plate

4.9(7)

50% Scale 0.2mm layer, 2 walls, 40% infill

Designer

9 min

1 plate

5.0(3)

60% Scale 0.2mm layer, 2 walls, 40% infill

Designer

10 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

188

208

148

Released

Description

This is a super easy way to set a specific depth for your tip-ups or jigging rods. This can be put on your line at any time and can be taken off just as easily. Simply run your line over the center (between the 2 holes) section of the “S” and move the “S” up or down until you reach your desired amount of line hanging below the “S”. Once desired depth is reached simply hoop your line over the top and bottom portions of the “S”. I posted a photo with some clear fishing line and also a few others using baler twine so it's easier to see how the line should end up. One of the photos with the baler twine shows just the top part looped over and the other one shows how it should look when both the top and bottom have been looped around. If my instructions aren't clear enough please let me know and I will do my best to draw instructions and post them.

Comment & Rating (17)

@wolfandraven

Good print, thanks for posting. I did scale the button down to 60% to fit better on the tipup line.

The designer has replied

@Cereal_Killr

Thanks for letting me know. What test weight are you using? I’d like to add another profile for it.

@wolfandraven

Replying to @Cereal_Killr :

I have a thinner 30lbs braid prior to my monofiliment. Here they are at 65 and 55% on the spool. I think 65% is to big for the spool and 55% might be to small to handle with cold fingers. You may also want to increase the depth of the grooves on the narrow ends of the button so theres less of a chance of slipping.

@Cereal_Killr

Replying to @wolfandraven :

sounds good, I’ll increase the depth on the ends by another mm or 2. Thanks for the feedback!

@user_746441315

Print Profile

0.2mm layer, 2 walls, 40% infill

great file!

@HPFactory

Boosted

awesome idea!

@Cowboy_Pedski

Boosted

Print Profile

0.2mm layer, 2 walls, 40% infill

Worked well on my tip-up. Nice and easy to use when it's cold out and you don't want your gloves off too long.

The profile uploader has replied

@Cereal_Killr

Glad it worked well for you! If you have any suggestions or recommendations for other useful ice fishing products I’d love to hear them.

@OpperHome

Print Profile

0.2mm layer, 2 walls, 40% infill

Worked great, had to wrap a few extra times to keep them from falling off but worked easier than a bobber.

@user_41603370

Print Profile

0.2mm layer, 2 walls, 40% infill

@suamicotrap

Print Profile

0.2mm layer, 2 walls, 40% infill

@One_big_honda

Print Profile

0.2mm layer, 2 walls, 40% infill

@Cives7022

Print Profile

50% Scale 0.2mm layer, 2 walls, 40% infill

@user_1897103365

Print Profile

50% Scale 0.2mm layer, 2 walls, 40% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Tweezers

NYDER

13.6 k

7.2 k

Q-Tip Shooter V2

Sairae

19.3 k

4.7 k

Infinite Pop-Up Fidget Toy

Viltsu

15.4 k

3.9 k

Ams Drypods

Fabian1830

28.4 k

3.5 k