Automotive Brake Piston Reset Tool

If you find this useful, please come back and give it a like. If it didn't work out for you, then some feedback would be appreciated.

I could not find one on MakerWorld like this already but, I did find one on Printables. All credit to @quietmesh. I placed it here for others to use with a 3mf. It does not require any non-3D printed parts like the ones I found here did. It worked well for me printed in Voxel PLA+. If you want one that will last forever (sort of), I would recommend using ASA. I needed one quickly since I was in the middle of a brake job. The profile is for a 0.4 nozzle using 0.2mm Strong presets. I did change the Order of Walls to inner/outer/inner and the Sparse Infill to gyroid, which are my defaults for most items that I print. I used my Cool Plate SuperTack for every material except for the ASA. Assembly should be obvious based on the part names and pictures. Appropriate Bambu filaments are listed below, you only need to choose one. I use these colors for any tool that I print so that they are easy to find when I need them and these colors typically mean that they are a maintenance or repair tool, to me.

Thanks,

Osogruñon