TRX4M Cantilever Rear Suspension (Injora Frame)
Print Profile(1)
Description
These parts will allow you to convert the rear suspension on your TRX4-M to a cantilever configuration to allow for more travel without sacrificing ride height.
This kit is intended for use with the Injora carbon fiber chassis as well as 59mm (extended length eye-to-eye) shocks
You will need these parts to complete the assembly:
- 4x Ball Bearings: 2.5mm ID, 6mm OD, 2.6mm Thick (Amazon)
- 2x Suspension links (I used stock ones, about 2.1" eye-to-eye)
- 2x Brass shock spacers (should come with the shocks)
- Assorted 2.5mm Bolts/Nuts
To assemble the pivot arms, insert a bearing into the front and rear counterbores. The deeper counterbore will face the chassis. The brass shock spacer will go between the bearing and the chassis. Do not over-tighten as these bearings are not ideal for axial loads. Just snug the nut up to ensure the bearings are completely pressed into the pivot arm, then back the nut off until the arm pivots freely.
Please let me know if you have any questions and I'll be happy to answer them! Enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)