Print Profile(1)
Description
Photo Frame A4 (210 × 297 mm)
This is a 3D printed photo frame designed to hold an A4-sized photo (210 × 297 mm).
The frame is made of four separate sides that are connected using snap-in corner connectors. Easy to print and no glue neccesarry.
Assembly instructions:
- The frame uses 4 corner connectors that click securely into the corners.
- I recommend first inserting the corner connectors into the two short sides.
- Then attach the two long sides to the short sides to complete the frame.
For my own build, I added a transparent sheet on the front to protect the photo and a simple piece of cardboard on the back for support.
After placing the photo, front cover, and backing, the frame can be closed using 4 sliding pins. These pins slide into slots in the sides and keep everything securely in place.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)