Ramp Spacer for DPX – Alice Pinball

Ramp Spacer for DPX – Alice Adventure in Wonderland Pinball

Print settings:

0.4 mm nozzle

PETG transparent

Layer height 0.16 mm

Standard profile

Brim recommended

This spacer pushes the middle ramp and the ramp protector slightly downward, resulting in a smoother ball flow through the ramp.

Installation:

Remove the two screws from the upper playfield section.

Remove the original black spacer on the left side of the ramp from the metal post.

Slide the printed spacer onto the metal post.

Make sure the spacer follows the shape of the ramp correctly.

Reinstall the screws of the upper playfield.

Simple 3D print with a noticeable effect on ball flow.