Search models, users, collections, and posts
Wall Mount for Alexa Echo Plus (2nd Gen)
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
48 min
1 plate
Open in Bambu Studio
Boost
5
29
2
1
33
26
Released
Description
Content has been automatically translated.
I designed this mount in **Fusion 360** and optimized it for **FDM printing** Two things were important to me:
- **Clean cable routing** – there's a cable slot at the back so the plug doesn't kink
- **Effortless installation** – the wall opposite the screw holes is **cut open** so you can easily use a **cordless screwdriver**
**Features**
- Suitable for **Echo Plus (2nd Gen)**
- **Cable outlet** at the back – power adapter sits stress-free
- **Side opening** for convenient screwing
- Designed for **3 walls** – stable with little material
- Prints **support-free**
Recommended Print Settings (0.4-mm Nozzle)
- **Layer Height:** 0.20 mm
- **Wall Lines:** **3**
- **Top/Bottom:** 5 / 4
- **Infill:** **Gyroid 15%**
- **Material:** **PLA**
- **Adhesion:** skirt; for PETG on a smooth plate, a thin brim if necessary
Assembly Instructions
- Choose suitable anchors/screws for the wall (e.g., Ø4–5 mm)
- First, mark **without the device**, drill, screw on the holder, insert the cable, then place the Echo
- Do not overtighten – only tighten hand-tight
**Scaling / Tolerance**
- Tailored for Echo Plus (2nd Gen) If your device deviates minimally: Scale **X/Y by ±1–2%**
Boost Me (for free)
Feel free to leave a boost to support me with my projects :-)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)