Blindfolded Goddess of Justice (Themis)
Print Profile(1)
Description
Boost Me (for free)
I would be grateful
The sculpture is a decorative bust representing the Blindfolded Goddess of Justice (Themis), excellent for contemporary decor.
I used non-Bambulab beige PLA (colors can be changed from the slicer).
The supports detach easily, you'll see.
A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small measures, along with many others, are what determine the success of a good print.
PRINTING INSTRUCTIONS:
Layer height 0.2 mm
Initial layer height 0.2 mm
Wall loops 2
Top shell layers 5
Bottom shell layers 3
Infill 12%
Grid pattern
Supports enabled;
Outer wall speed 200 mm/s
Inner wall speed 300 mm/s
Normal print acceleration speed 8000 mm/s
Outer wall acceleration speed 8000 mm/s
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (8)