DragonFusion3D

cover

1000037542.jpg

plate_1.png

1000037543.gif

Loose Fit2 Wall Loops5 Top Shells3 Bottom Shells.2mm layer height

Mini Fidget Spinner V2 - Loose Fit .2mm

2026-01-13_69d3bdf7c80d1.gif

2 Wall Loops5 Top Shells3 Bottom Shells15% infill

Mini Fidget Spinner V2 - Tight Fit .2mm

DomPerignon

tempImage7iBZK5.jpg

I added 2 tighter lids so the spinner does not need glue anymore:<ul><li>a lid tighter than the ones in designers profiles (try this one first)</li><li>an even tighter lid, in case if the first one is not tight enough on your set up . On my A1 mini + PLA it is tough to clip on: if you have a hard time, put the lid on a flat surface, then push the spinner+spindle while its level.   </li></ul>I painted brims to help adhesion, they are easy to remove. Feel free to turn them off.

Tight lid, no glue needed

Mini Fidget Spinner - use 12mm long filament piece

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Want More Models? Boosts Help!!</boostcontent></boostme><h3>Mini Fidget Spinner V2</h3>Free Commercial LicenseA small 2 gram, fast-printing Mini Fidget Spinner with smooth spinning action. Pocket-sized and perfect for desks, giveaways, or craft markets.<ul style="list-style-type: disc"><li>No supports</li><li>Quick and easy print</li><li>2 Print Profiles - Loose Fit and Tight Fit</li><li>Works great in multiple colors</li><li>No Extra Parts Needed!!! </li><li>Depending on your printer and filament, Tight profile may need a dab of glue on the axel. </li><li>Loose profile will need glue.</li></ul>License: Free commercial use. You may sell printed copies, but do not resell the digital file.&nbsp;Whats new in V2?<ul><li>No longer need to cut a piece of filament! It prints all in one now! </li><li>Rounded out some edges.</li></ul>

Print Profile(3)

Description

Mini Fidget Spinner V2

Comment & Rating (104)

This remix is based on

License

Related Models

Mini Fidget Spinner V2 - 2 grams - FREE COMMERCIAL