E-Scooter Turn Signal Button (Ninebot & Xiaomi)

Search models, users, collections, and posts

Engineerify

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

P2S

H2D

H2S

H2C

X1E

X1 Carbon

A1 mini

P1S

H2D Pro

P1P

X2D

A2L

0.12mm layer, 3 walls, 30% infill

Designer

17 min

1 plate

3.0(2)

Open in Bambu Studio

Boost

105

Released

Description

Turn Signal Button Replacement – fits most Ninebot & Xiaomi scooters (check compatibility)

If your turn‑signal button is lost or broken, you don’t need a plastic small button for €10+. This 3D‑printed replacement button is designed to match the original shape as closely as possible.
Originally designed for the Ninebot E2 Plus II, but many Ninebot and Xiaomi scooters use the same or very similar indicator units.

Important: Compatibility varies – users must verify fitment themselves.

Compatibility (self‑check required)

Tested on:

Ninebot E2 Plus II

Likely compatible with:

Ninebot Max G2
Ninebot F‑Series
Ninebot E‑Series
Xiaomi scooters with stock or aftermarket indicators
Generic units with the oval double‑arrow design
No guarantee – users must confirm before printing.

Why this model?

Designed to be as close to the original as possible
Fast print: ~17 minutes
Strong, simple, functional
Affordable alternative to overpriced replacement parts
Includes .3mf for plug‑and‑play printing

Recommended Print Settings

Material: PLA works, PETG/ABS/ASA should also work for durability
Layer height: 0.12–0.20 mm
Infill: 20–40% (Gyroid)
Supports: No support needed
Print time: ~17 minutes

Installation

Remove the old button remains and press the new one into the guide.
It should snap into place with a light click.

Comment & Rating (5)

@user_250235231

Thank you for this! Works well enough on my son's E2 Pro. The tabs and holes line up for a click-tight fit; however the face plate is a little thin. The thin face plate allows for excess travel to make contact with the signal buttons. It's close enough to function and <20 mins print time is worth it to avoid shipping costs and time.

@200iqwthellymap

this print sucks does m not fit the

@200iqwthellymap

Print Profile

0.12mm layer, 3 walls, 30% infill

worst

@user_2682264830

Do you also have the cap for the turn signal, perhaps for the F2 Plus

Show original

@retOK1209

Print Profile

0.12mm layer, 3 walls, 30% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.