Hi! Absolutely amazing model! Almost completely fixed the problems I was having with my g29, the only one left being tightening. It's rather hard to turn the screws, so I was wondering if you could make a tightener to go over the screws, just to give a bit more grip. 
great job overall! 

M4 Sherman

user_182624768

It Works rather well
I wish the threads were the same as the original screw so i didnt have to print the new screw as well

NotEasyGames

CryptoGamer1612

cover

20260113_154734.jpg

20260113_154712.jpg

20260113_154701.jpg

20260113_154650.jpg

plate_1.png

plate_2.png

20260113_154603.jpg

<p>0,2 mm Schichthöhe</p><p>2 Wände</p><p>70% Füllung</p>

<p>0.2 mm layer height</p><p>2 walls</p><p>70% infill</p>

0.2mm layer, 2 walls, 70% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>🇩🇪 Kurzbeschreibung</h2><p><strong>Ersatz-Tischklemme für Logitech G29 / G920 / G923</strong><br>Nachmodellierte Tischklemme als Ersatzteil für Logitech G29, G920 und G923 Lenkräder.<br>Geeignet zum 3D-Druck zur erneuten Befestigung des Lenkrads an Tisch oder Sim-Rig.</p><h2>🇩🇪 Print Settings</h2><p><strong>Empfohlene Druckeinstellungen:</strong></p><ul><li>Material: ABS</li><li>Layerhöhe: 0,2 mm</li><li>Infill: ≥ 40 % (Gitternetz)</li><li>Perimeter/Wände: ≥ 2</li><li>Top/Bottom Layers: ≥ 2</li><li>Supports: erforderlich (Baum)</li><li>Druckausrichtung: wie hochgeladen empfohlen</li></ul><p><strong>Hinweis:</strong><br>Die mechanische Belastbarkeit hängt stark von Material, Infill und Druckqualität ab. Vor dem Einsatz sollte die Passform und Stabilität geprüft werden.</p><h2>------------------------------------------------------------------------------------------------------------------------------------------------------</h2><h2>🇬🇧 Short Description</h2><p><strong>Replacement Desk Clamp for Logitech G29 / G920 / G923</strong><br>Reverse-engineered desk clamp replacement for Logitech G29, G920, and G923 racing wheels.<br>Designed for 3D printing to securely mount the wheel to a desk or sim rig.</p><h2>🇬🇧 Print Settings</h2><p><strong>Recommended print settings:</strong></p><ul><li>Material: ABS</li><li>Layer height: 0.2 mm</li><li>Infill: ≥ 40 % (grid)</li><li>Perimeters/Walls: ≥ 2</li><li>Top/Bottom layers: ≥ 2</li><li>Supports: required (tree)</li><li>Print orientation: as provided/recommended</li></ul><p><strong>Note:</strong><br>Final strength depends on material choice, infill, and print quality. Test fit and structural integrity before use.</p>

<h2>Short Description</h2><p><strong>Replacement Desk Clamp for Logitech G29 / G920 / G923</strong><br>Reverse-engineered desk clamp replacement for Logitech G29, G920, and G923 racing wheels.<br>Designed for 3D printing to securely mount the wheel to a desk or sim rig.</p><h2>Print Settings</h2><p><strong>Recommended print settings:</strong></p><ul><li>Material: ABS</li><li>Layer height: 0.2 mm</li><li>Infill: ≥ 40 % (grid)</li><li>Perimeters/Walls: ≥ 2</li><li>Top/Bottom Layers: ≥ 2</li><li>Supports: required (tree)</li><li>Print orientation: as provided/recommended</li></ul><p><strong>Note:</strong><br>Final strength depends on material choice, infill, and print quality. Test fit and structural integrity before use.</p><h2>------------------------------------------------------------------------------------------------------------------------------------------------------</h2><h2>Short Description</h2><p><strong>Replacement Desk Clamp for Logitech G29 / G920 / G923</strong><br>Reverse-engineered desk clamp replacement for Logitech G29, G920, and G923 racing wheels.<br>Designed for 3D printing to securely mount the wheel to a desk or sim rig.</p><h2>Print Settings</h2><p><strong>Recommended print settings:</strong></p><ul><li>Material: ABS</li><li>Layer height: 0.2 mm</li><li>Infill: ≥ 40 % (grid)</li><li>Perimeters/Walls: ≥ 2</li><li>Top/Bottom layers: ≥ 2</li><li>Supports: required (tree)</li><li>Print orientation: as provided/recommended</li></ul><p><strong>Note:</strong><br>Final strength depends on material choice, infill, and print quality. Test fit and structural integrity before use.</p>

Print Profile(1)

Bill of Materials

Description

Short Description

Print Settings

------------------------------------------------------------------------------------------------------------------------------------------------------

Short Description

Print Settings

Comment & Rating (3)

License

Related Models

Logitech G29/G920/G923 replacement clamp and screw

Print Profile(1)

Bill of Materials

Description

Short Description

Print Settings

------------------------------------------------------------------------------------------------------------------------------------------------------

Short Description

Print Settings

Comment & Rating (3)

License

Related Models