Brick Head Slider + Flip Fidget - Print in Place

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance, then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  Also, make sure your nozzle is clean so you are not depositing black into the yellow. If you have issues, please contact me and happy to help. 

Brick Head Flip & Slider Fidget

Say hello to the happiest little brick head your hands will ever meet. This building-block–inspired slider + flip fidget is packed with personality and way more expressions than your Monday morning face. One side shows the classic cheerful brick face. Flip it over and—boom—you get a smirk / semi-mad expression for when things go slightly off the rails. Same brick, different mood. 😏😐

Designed with a smooth hinge + pin mechanism, this fidget delivers satisfyingly clicky motion without coming apart mid-fidget session.