Winter's Frost Bookmark Set

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

These illustrations offer a glimpse into a silent, frozen world, perfect for accompanying a good book. Both pieces utilize a cool blue and black color palette, highlighting the magic of lunar phases and the enchantment of the night sky. One bookmark showcases a serene, moonlit forest scene with silhouetted trees along a winding river, against a mysterious sky and the other captures a full moon over a tranquil, icy landscape with a reflection off the water, evoking a sense of calm and wonder.

Can be printed with or without a tassel.

Night of Winter Bookmark Set

Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Cyan Transmission Distance: 3.5

PLA Default White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer (0.92mm) swap to Cyan

At layer (1mm) swap to White for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections