Claymore - Free 3D Print Model

Search models, users, collections, and posts

KellKabrinski

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(3)

All

P1S

X1E

H2S

P1P

H2D Pro

H2D

X1 Carbon

H2C

P2S

X2D

A2L

0.16mm layer, 4 walls, 15% infill No AMS required

Designer

23.8 h

3 plates

0.16mm layer, 4 walls, 15% infill PETG interface

Designer

31 h

3 plates

0.16mm layer, 4 walls, 15% infill Bambu Interface

Designer

31.8 h

3 plates

3.0(1)

Open in Bambu Studio

Boost

Released

Description

This is a full size claymore modeled after my real one. While an excellent sword, the real thing is a bit difficult to carry at renaissance fairs, especially given the lack of a sheath means it can't be peace-tied. This is printed with four walls for strength and has a hollow for a ½ inch dowel for added reinforcement. I've split the print into three colors so that it can be printed without an AMS, but I strongly recommend using either the PETG or Bambu support Filament profiles if you have an AMS. If you have to use the other one, be very careful to clean out the alignment holes before gluing the sword together or you'll get a bend which is very noticeable given the length of the assembled sword.

Update: Since I've taught myself more CAD I've uploaded a new version here that fixes a few issues this model had: https://makerworld.com/en/models/2507196-claymore-version-2#profileId-2756794

Comment & Rating (1)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.