Print-in-Place Chain – No Supports, Tested Print

Description

This is a print-in-place flexible chain designed to work straight off the build plate.

• No supports required
• Fully articulated after printing
• Tested with a real print – photos show the actual printed model
• Ideal as a mechanical test print, flexibility demo, or functional chain element

🔧 Technical Details

• Total number of chain links (teeth): 20
• Size of a single chain tooth: 6 × 11 × 2 mm
• Designed to print as one single piece

🖨️ Print Settings (Recommended)

• Layer height: 0.08 mm (minimum possible layer height recommended)
• Supports: None
• Brim/Raft: Not required
• Material: PLA (tested), other materials may work but are not guaranteed

ℹ️ Notes

• Make sure your printer is well-calibrated for small clearances.
• After printing, gently flex the chain to fully free the joints.
• Do not force it while still hot.

If it prints cleanly on your machine, your calibration is in good shape.