Search models, users, collections, and posts
Wahoo KICKR CORE 1 Tennisball Rocker Feet
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill, NO support needed
8.3 h
2 plates
Open in Bambu Studio
Boost
2
23
1
0
35
13
Released
Description
Wahoo KICKR CORE 1 Tennisball Rocker Feet to have a more dynamic and comfortable setup when riding.
in addition you'll need two tennisballs per feet, so 8 in total.
fits easily on 225 x 225 printbeds
prints without supports
make sure to have shrinkage settings right for the 40 mm bore
it should be a snug fit - you might need a few taps with a hammer and a little grease to fit it on the pipe
printed with PLA+, 0.8 mm Nozzle, 15% Gyroid Infill, 2 walls, 4 top and bottom shell layers
prints in about ~2.5 h using ~150g filament
seems plenty strong, with 85kg rider
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)