confermo che è un adattamento in scala non perfetta, anche per avere spessori minimi di stampa. per migliorare la qualità si può ridurre l’altezza layer a 0.12 ma si allungano molto i tempi di stampa. ho ruotato il cuscino in verticale proprio per limitare il problema. grazie comunque del feedback. 

I confirm that it is a not perfect scale adaptation, also to have minimal printing thicknesses. To improve quality, you can reduce the layer height to 0.12 but printing times will be much longer. I rotated the cushion vertically precisely to limit the problem. Thanks anyway for the feedback

Anish1976

consiglio comunque di essiccare il filamento e fare una taratura della testina. Nelle stampe che ho fatto io, non è così evidente lo sfalsamento dei livelli

I still recommend drying the filament and calibrating the print head. In the prints I made, the layer offset is not so evident

thanks for that Modell, that is actually accurate in shape. I printed this model for my mum, because she has a collection of VITRA Chairs. when I put it beside the other models I figured out it is not scaled right. 
The model is too big (1:5.4)

I am going to resize it an print again. 

quality is not to nice so far, Becaus layers are visible to much. But I just started printing. so maybe it is my fault. 
so anyway thank you! 

ovhnhf

de Moll

PLA  11100 (seduta) e 10205  (cuscino) e - Layer 0,16 mm

PLA 11100 (seat) and 10205 (cushion) and - 0.16 mm layer

cover

2026-01-12 15.23.51.jpg

2026-01-12 15.24.04.jpg

2026-01-12 15.24.12.jpg

2026-01-12 15.24.17.jpg

2026-01-12 15.24.46.jpg

2026-01-12 15.23.38.jpg

sedia scala 1 a 6

plate_1.png

Cuscino scala 1 a 6

plate_2.png

sedia scala 1 a 10

plate_3.png

Cuscino scala 1 a 10

plate_4.png

sedia scala 1 a 7,5

plate_5.png

cuscino scala 1 a 7,5

plate_6.png

2026-01-12_9cea131fe2606.jpg

2026-01-12 15.23.45.jpg

stampa con supporti che non richiede AMS.I files del cuscino e della seduta sono separati.Il profilo di stampa ha altezza layer impostata di 0.16mm ma se si vuole una maggiore morbidezza delle curve è consigliabile abbassare i livelli a 0.12 mm. Riempimento 10% con 3 pareti perimetrali.Stampata in PLA

print with supports that does not require AMS.The cushion and seat files are separate.The print profile has a layer height set to 0.16mm, but for smoother curves, it is advisable to lower the layers to 0.12 mm. 10% infill with 3 perimeter walls.Printed in PLA

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Replica dell&#39;iconica seduta disegnata negli anni cinquanta dal designer Finlandese-statunitense Eero Saarinen e prodotta ancora oggi da Knoll. Le foto sono della stampa realizzata e priva di ogni post-lavorazione. Mi raccomando di rimuovere i supporti con l&#39;aiuto di una pinza a becco ricurvo, in modo da non spezzare l&#39;esile piede di sostegno della seduta. Il file contiene 3 dimensioni di seduta e cuscino: scala 1:6. scala 1:7,5 (perfetta per la casa delle bambole) e 1:10 (per chi collezione le miniature). <boostme><boosttitle>Boost Me</boosttitle><boostcontent>Se ti piacciono le mie miniature, sostieni il mio lavoro con un Boost. Ti ringrazio in anticipo</boostcontent></boostme>

Replica of the iconic chair designed in the 1950s by Finnish-American designer Eero Saarinen and still produced by Knoll today. The photos are of the printed model and are free of any post-processing. I recommend removing the supports with the help of curved-nose pliers, so as not to break the delicate support foot of the seat. The file contains 3 sizes of seat and cushion: scale 1:6, scale 1:7.5 (perfect for dollhouses) and 1:10 (for those who collect miniatures). <boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my miniatures, support my work with a Boost. Thank you in advance</boostcontent></boostme>

Print Profile(1)

Description

Comment & Rating (5)

License

Related Models

Tulip Armchair - designed by Eero Saarinen - 1956

Print Profile(1)

Description

Comment & Rating (5)

License

Related Models