Milling template with aluminum profiles
Print Profile(1)
Description
Buying ready-made milling templates from aluminum profiles is quite expensive
I used Bosch Profile Slot 8 120x15 here, which cost us about 30€/meter
A hole with a 15mm diameter is drilled 20mm from the edge A drill bit with carbide inserts was used
I deepened the area of the aluminum profile where the screw will eventually sit with an angle grinder so that the screw can be centered within the 15mm profile height
DIN912 M5x30 screws and M5 hammer-head nuts for 6mm slots are used as fasteners
The printed slot plate is inserted on the side with the hole, and the end cap is placed on the other side to protect the profile end
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (5)