RC Glider
Print Profile(8)
Description
This is a modified version that can be printed on Bambu lab.
The wings have a hole for carbon fiber arrow shaft ID 6.2 sp300 which is about 7.7mm outside diameter.
I increased the length of the nose by 50mm. I had to put more than 100g of ballast in the nose of the first plane.
The pictures are from the first plane. I have print the parts for this one, but it will take some time for me to assemble it.
The firewall is for Dualsky XM3045EG, I used this one.
Everything is printed in PetG and glued with CA glue.
The first plane was flying wery well but I have crashed it because I lost the RC signal. My mistake, I just trow the receiver inside the fuselage next to the ESC and all the servo wires. Now I made two holes for the antennas on the fuselage.
All the files are atached as Raw Model Files…
Note:
This is not a model for a first build. You will need some experience.
And I will not make an assambly guide, I don't have time. I'm just sharing what I have made for me.
Have fun…
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (59)