STUNTMAN STEVE Action Figure Action Remix

STUNTMAN STEVE IS HERE!!!!!  Ready for Adventures with his full Action Pack in this remix.  He is here to kick butt and take names… and oops, he forgot his pencil! He has a better (much more handsome) head, actual hands, and nicer shoes.  The S.C.U.B.A. Steve parts come with fins, goggle mask head, and SCUBA tanks!  

The Action Pack comes with a remixed Steve, a SCUBA Steve version as well, plus THREE vehicles with interchangeable parts, a wing backpack, a zipline, and a parachute backpack.  All the things a Stuntman needs to get his Adventures going!

To assemble the motorcycle base, there are three pegs that go on the inside and then the two pieces just snap together.  Add the handlebars and blasters to finish the base unit.  This unit fits inside the 4wheeler base and the jetski base as well.  To fit it in, just angle the front end down and in first, then snap the back end down as well:

To assemble the wheels, slide a tire over the one side of the axle piece, and screw in the other axle screw for each one.  A drop of glue on the axle doesn't hurt but sometimes a wheel flying off is just what the stunt needs!

The parachute requires an 18"x18" piece of a trash bag.  You'll use masking tape over the corners to reinforce it, then punch a hole at each corner.  Cut two pieces of string at 36" long each.  Tie one corner, thread it through a loop on the parachute backpack, then tie to another corner.  Repeat with the other side and the second piece of string.  Now Steve is ready for some crazy airborn stunts as well.

The zipline assembles just like one of the wheels and fits in Steve's grip.  All you need is a thick piece of string or yarn tied off and he's ready for action!