𝚂̶𝚙̶𝚎̶𝚊̶𝚛̶ Scepter Of Longinus
Print Profile(3)
Description
Scepter Of Longinus.
Since in the show Evangelion the Spear Of Loginus can change size I decided to make what it would look like as a shorter “Scepter” version of the original.
Assembly
The Scepter comes in 7 main parts that are assembled with glue and the included dowels. the total length of the Scepter is around 90 cm.
The thin long dowels connect the bottom of the shaft to the middle part.
The thin short dowels connect the middle to the top twirly bit.
The thicker longer dowels connect the blades to the twirly bit.
The dowels to assemble the blades are printed alongside them.
For illustrative purposes I printed the dowels black, but I suggest printing them the same color as the Scepter.
The blades aren't exact mirrors, so before gluing try which blade fits which side best (Check if the connection between the blade and the twirly bit is flush)
I'm going to sand and paint mine gemstone red, but I think it looks cool in PLA red too.
Attention!
This model is meant to be glued.
P.S.
Let me know if I should make the original spear version as well.
Any suggestions for future projects are also welcome.
Boost Me (for free)
If you enjoyed the model why not give me a boost. I mean it if the button is already here it would be a waste not to use it right. ;D
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)