Easter Egg with bunny ears - Free 3D Print Model

Search models, users, collections, and posts

SabreDesign

Household>Festivities

IP Report

Print Profile(21)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Small, 0.2mm layer, 1 walls, 0% infill

Designer

1.7 h

1 plate

4.9(1.1 k)

Large, 0.2mm layer, 1 walls, 0% infill

Designer

2.8 h

1 plate

4.9(511)

Large, 0.24mm layer, 1 walls, 0% infill

Designer

3.2 h

1 plate

4.8(96)

0.2mm Fixed all problems with ears and body. (Strong Ears)

1.7 h

1 plate

5.0(135)

Click to see more

Open in Bambu Studio

Boost

4096

11041

2207

1.1 k

17.7 k

13.6 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

D37.2x36.6mm LED Flame Tea Light Candle Set

D37.2x36.6mm LED Flame Tea Light Candle Set

D37.2x36.6mm LED Flame Tea Light Candle Set

Description

Modern and fun Easter Egg with bunny ears. Easy print and great for spring/easter decoration.

Large egg has a big enough hole to fit a tea light, and when you used a light or transparent filament you will be able to see the light shine through the model. The large egg is 193mm tall and small egg 135.
Both models are hollow to save on filament and print profiles are set to print 1 wall with 0 infill.

Modern easter egg decoration. Large egg is compatible with tealight (use light or transparent filament in this case).

If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign

Check out more of my designs below and on my profile:

Comment & Rating (2207)

@Lucky13Gr

as always ,no exceptions here ,awesome design from Sabre !!! one issue i notice in my printer at ears at some prints ... i had similar problem with the angel's wings (christmas decorations) so it just came up to my mind now ,how to fix this one, with extra walls at ears by cutting the piece and reassembly.

(Edited)

@user_713490129

Hello, I have the same problem Could you perhaps provide a brief guide on how the cutting and reassembly works exactly That would be fantastic, many thanks

Show original

@Lucky13Gr

Replying to @user_713490129 :

this is quite simple ...you slice the item and you find where the ear's base starts and try with the cut tool of the slicer to cut from that area and a bit lower ! perform the cut (without any connectors ofc).when you do that go to objects tab at the right panel and choose the upper part (the ears part ) and go to strength and raise the amount of the walls ! when you do that join the to parts together with Merge (choose both of them and right click in one of the 2 objects and click merge ) when you do that at the tools at the top of the window go to the assemble tool and do the assmble by faces ..choose 1st the down part 1st (you can do it and vice versa but you will have to re-locate the object ) and then the ears part and you press the green button "center coincidence" and you are done !!! i hope you understand my point cause my english are not very good !!

(Edited)

@user_713490129

Replying to @Lucky13Gr :

Thank you so much!

@Adrian_S

Lovely model, but unfortunately the ears are prone to defects in this area because somehow the slicer won't unretract properly (blue dots). This led to the same defect on five different prints where there is a hole in the ear. Making the ears two walled would be perfect.

@user_1446868953

That's exactly the problem I'm having too, printed two rabbits and both have errors

Show original

@user_713490129

Replying to @user_1446868953 :

I am also struggling. Does anyone have a suggestion for resolving this issue? That would be fantastic

Show original

@deff01

Hey, try my profile, i fixed this :)

@DDDPrinted

Boosted

Print Profile

0.2mm Fixed all problems with ears and body. (Strong Ears)

Your designs never disappoint! Inland Matte Rainbow Filament, printed at 180% on X1

The profile uploader has replied

@deff01

Thank you!

@SusiKnalltuete

Print Profile

Small, 0.2mm layer, 1 walls, 0% infill

Cool model, great print. Thanks for the file

Show original

@net0ronin

Print Profile

Ears more stable, 0.16mm layer

Very nice. Everyone is enthusiastic……

The profile uploader has replied

Show original

@3DDruckArning

Thank you for your review. They are also very popular with us 🤣

Show original

@mskvorc

Boosted

Print Profile

0.2mm Fixed all problems with ears and body. (Strong Ears)

Beautiful

The profile uploader has replied

@deff01

Thank you, nice color!

@BlinkInc

Print Profile

0.2mm Fixed all problems with ears and body. (Strong Ears)

Turned out perfect! Nice design, easy print!

The profile uploader has replied

@deff01

Thank you!

@MatMan1.0

Boosted

Print Profile

0.2mm Fixed all problems with ears and body. (Strong Ears)

Excellent profile Three walls at the ears yield superior quality and stability

The profile uploader has replied

Show original

@deff01

Thank you!

@C_K_Z

A truly lovely file, yet a flaw consistently appears in the same spot on the ears, regardless of whether it's the large or small Easter egg with bunny ears

Show original

@thorsten.voss

I have the same Problem . Printed 3 of them on every eggs the right ear was broken :(

@deff01

Replying to @thorsten.voss :

Hey, try my profile, i fixed this :)

@PZE_

Boosted

Print Profile

Large, 0.2mm layer, 1 walls, 0% infill

The print is complete therefore 5 stars

Show original

@Chouz

Hello, is it possible to have a link to the filament used?

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.