Articulated Cute T-Rex

ℹ Tips for printing Multicolor:

• Filament: PLA
• Supports: No!
• Layer height: looks best in 0.16(0.15)mm / 0,2mm also works
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: No!
• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
• Info‼: You can scale the T-Rex bigger but not any smaller otherwise the Connectors will no longer work!

ℹ Tips for printing Multipart:

• Filament: PLA
• Supports: No!
• Layer height: White and Black Parts in 0.12(0.10)mm / DarkBrown and LightBrown in 0,16(0.15)mm
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: No!
• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion! + with a Smooth Plate you will see the numbers and letters better than on a Textured Plate!
• Info‼: Please do not scale the T-rex down, as the numbers would no longer be readable and could not be properly attached to the designated positions.
• Info‼: You can scale the model bigger

In both cases (multipart and multicolor), a connector must be glued in place to hold the head securely on the body. Please wait until the adhesive has fully cured. The head Top and Bottom needs to be clipped on!

In the multipart version, each position is marked with a number or letter to make it easier to identify and glue the parts correctly. Please make sure that the numbers and letters match exactly.

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (4 Color):

• PLA Matte / DarkBrown
• PLA Matte / LightBrown
• PLA Matte / White
• PLA Matte / Black

Or decide for yourself which colors and how many you want to use!

ℹ This model is very filament wasteful please keep that in mind!

------------------------------------------------------

ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)