Idler Pulley scraper (to remove gunk and deposit)

If you've racked up thousands of hours on your P1P/P1S/X1C/X1E, it is inevitable at some point you will encounter print quality issues due to gunk and deposit built up on the idler pulleys.

The following official Bambu Lab guide shows you how to use q-tips to clean the pulleys, but from my experience, most of the baked-on gunk cannot be removed using just q-tips. I therefore custom designed this pulley scraper for the sole purpose of scraping those gunk off the pulleys without scratching or damaging them, which can happen if you use off-the-shelf metal scrapers.

https://wiki.bambulab.com/en/x1/maintenance/how-to-clean-the-idler-pulleys

This tool was designed for the P1P, P1S, X1C, X1E printers. It might work for other pulleys on other printers but it's untested. It is meant to be a disposable tool. It only takes 15 minutes to print and it will make your job of cleaning those pulleys a piece of cake!