Gloomhaven 2E Monster Standee Base (59HP) Remix

This is a remix of the monster base originally designed by @Russentechnik, which itself was a remix of a model by @SgtCaffran_841785 (@SgtCaffran).  Please see one of their model pages for detailed assembly instructions and leave a rating for SgtCaffran's brilliant work.  The alignment is very important - do not try to force fit the gears!

The cardboard standees and conditions in Gloomhaven 2E measure ~2.2mm thick.  The gap in Russentechnik's model measured ~1.9mm, which led to all of the bases snapping. Here, I increased the gap to comfortably fit the thicker Gloomhaven 2E cardboard, while adjusting other clearances for smoother action.

Due to the tight clearances, I highly recommend printing with a 0.2mm nozzle.

The profile attached is colorized and includes all of the correct amounts to replace the full number of bases included in Goomhaven 2E.  I use brown for common monsters and grey for elites, as I found the original white / yellow to be distracting on the board.  Changing the color is relatively simple though.